Basic Operation; To Switch Handset On/Off; Lock/Unlock The Keypad; Entering A Number In Idle - Mitel 112 User Manual

Table of Contents

BASIC OPERATION

The following sections explain three basic operations of the handset: how to switch the
handset on/off, how to lock/unlock the keypad, and the options available when you enter a
number from idle mode.

TO SWITCH HANDSET ON/OFF

Switching on the handset
To switch the handset on, long-press the
"Searching" for a short while until a signal is detected. The handset then displays the
registration number and is ready for use.
Switching off the handset
To switch the handset off, return to the idle screen and long-press the
handset will turn off.

LOCK/UNLOCK THE KEYPAD

To prevent accidentally calls, you can lock the keypad.
Locking the keypad
To lock the keypad long-press the
"Press and hold
status bar.
Unlocking the keypad
To unlock the keypad long-press
disappears.
Note: It is possible to answer or reject an incoming call while the keypad is locked.

ENTERING A NUMBER IN IDLE

When entering a number in idle it is possible to call the number by pressing the
Otherwise, the following two different options are available when a number is entered in idle.
Save
Press the Save softkey to add the number as a local contact.
Clear
Press the "Clear" softkey to delete one character at a time to the left of the cursor.
∗
". When the keypad is locked, the "Key Lock" icon
key. When the handset is on, it displays
in idle. The following text message is displayed:
until the text message "Press and hold *"
key and the
is displayed in the
key.
11