Dialing A Call Log Entry; Call Forking; Handset, Handsfree And Headset Modes; Switching Between Handset And Handsfree Modes - Mitel 5215 Administration Manual

5215 and 5220 IP Phone SIP User and Administrator Guide

Dialing a Call Log Entry

To dial a Call Log entry:
8. Press Superkey, and then press >> until CALL LOGS? appears on the display.
9. Press OK, and then press ▼ to navigate to the desired log type (Missed Calls, Answered
Calls or Outgoing Calls).
10. Press OK. The number of calls appears on the display.
11. Press and
12. When the desired entry appears on the display, press DIAL. The log is dialed and the
phone returns to the default display.
13. Lift the handset.

Call Forking

You can register your SIP ID with several SIP sets and have all configured sets ring
simultaneously. The indicator lamps of all configured aliases will flash until the call is
answered, and then all lamps except the answering set are extinguished. All Mitel SIP
phones support call forking.

Handset, Handsfree and Headset Modes

Switching Between Handset and Handsfree Modes

To go from handset to handsfree mode:
1. Press Speaker.
2. Hang up the handset. The Microphone key turns orange, and you can now use the
speaker to communicate with your party.
To go from handsfree to handset mode:
• Lift the handset. The Microphone key turns off, and you can now use the handset to
communicate with your party.

Switching Between Handset and Headset Modes

To go from handset to headset mode:
1. Press the Headset key. The Headset key turns orange.
2. Hang up the handset. You can now use the headset to communicate with your party.
To go from headset to handset mode:
1. Lift the handset.
2. Press the Headset key. The Headset key turns off, and you can now use the handset to
communicate with your party.
to navigate through the logged call entries.
- 26 -