Transfer A Call To A Third Party Already On Hold; Conference Call (Three-Way); Add A Third Party To A Call In Progress; Add A Party On Hold To A Call In Progress - Mitel NAVIGATOR User And Administrator Manual

NAVIGATOR - SIP User and Administrator Guide
•
To talk to this party, wait until the connection is established, speak to the party, press the
TRANSFR softkey, and then hang up. This is an Attended Call Transfer.
•
To transfer the call without speaking to this party, immediately press the TRANSFR
softkey, and then hang up. The held call will be transferred to the call in progress. This is
an Unattended Call Transfer.
•
To cancel the transfer, press

Transfer a Call to a Third Party Already on Hold

1. While on a call, press
2. Press the Line key of the call on hold, and then press
3. Hang up.

Conference Call (Three-Way)

Note: During a conference call, any party can perform a call transfer when one line on the
phone that initiated the conference call is not in use. For call transfer information, see Call
Transfer on page 3.

Add a Third Party to a Call in Progress

1. Press (TRANS/CONF). The current call is put on hold.
2. Press a free Line key, and then do one of the following:
•
Dial the number.
•
Press a Speed Dial key.
•
Press (REDIAL).
3. Press DIAL.
4. When the new party answers, press the CONF softkey. The call put on hold in step 1 is
connected to the call in progress.
Note: If the new party does not answer, press

Add a Party On Hold to a Call in Progress

1. Press (TRANS/CONF). The current call is put on hold.
2. Press the Line key of the party already on hold.
3. Press (TRANS/CONF). The call put on hold in step 1 is connected to the call in
progress.

Leave a Conference Call

Do one of the following:
•
Hang up.
•
Press HANGUP softkey.
30
(CANCEL). You are returned to the held call.
(TRANS/CONF). The call is put on hold.
(CANCEL) twice to return to the held party.
(TRANS/CONF).