Upgrade The Phone's Firmware; View The Firmware Version; Upgrading The Firmware - Mitel NAVIGATOR User And Administrator Manual

7. Press (SUPERKEY) to return to the default display.
8. For the settings to take effect, reboot the phone (i.e. unplug the power source from the
phone, and then plug the power source back in).

Upgrade the Phone's Firmware

IMPORTANT! You must upgrade to Release 5.0.0.20 before upgrading to Release 6.0. See
the Release Notes for SIP Release 6.0 available at http://sipdnld.mitel.com/.
For detailed information about firmware upgrades:
•
Access the About Firmware Updates Page in the Administrator's Web Configuration Tool
Online Help (see page 3).

View the Firmware Version

To view the firmware version using the Web Configuration Tool:
•
Access the Home Page of the Web Configuration Tool.
To view the firmware version using the Superkey Menu Interface
1. Press (SUPERKEY).
2. Press the Line 2 key. Both the main and boot firmware versions appear on the display.
3. Press (SUPERKEY) to return to the default display.

Upgrading the Firmware

To upgrade the firmware using the Web Configuration Tool:
•
Access the Network Configuration and Firmware Update pages of the Web Configuration
Tool.
To upgrade the phone's firmware through the Superkey Menu Interface:
1. Press (SUPERKEY), and then press >> until SETTINGS & OPTIONS? appears.
2. Press OK, and then press ▼ until UPGRADE FIRMWARE? appears.
3. Press OK. CHOOSE PROTOCOL appears.
4. Press the desired protocol (HTTP or TFTP), or press AUTO. BEGIN UPGRADE NOW?
appears.
5. Press CONFIRM. The downloading process begins and the phone reboots. This process may
take approximately 1 to 2 minutes. When the time and date appear on the display, the
download and reboot is complete and the phone is ready for use.
To upgrade the firmware from the boot program:
•
Access the Configuring in the Main and Boot Programs topic in the Administrator's Web
Configuration Tool Online Help (see page 3).
NAVIGATOR - SIP User and Administrator Guide
43