Auto Answer; Answer A Call Waiting; Calling And Called Party Display - Mitel NAVIGATOR User And Administrator Manual

•
Hang up the handset to end a handset call.
•
Press (CANCEL) to end a headset call.
•
Press (SPEAKER) to end a handsfree call.
For more information on handset, handsfree (Speaker) or headset calls, see Handset, Handsfree
and Telephony Headset Modes on page 3.

Auto Answer

You can use Auto Answer to automatically answer incoming calls in handsfree or headset mode.
To enable or disable Auto Answer:
•
Access the Feature Configuration page of the Web Configuration (see Accessing the Web
Configuration Tool on page 3).
To answer an Auto Answer call:
•
Begin speaking when the call arrives.
To end an Auto Answer call, do one of the following:
•
Press (CANCEL).
•
Wait for the caller to hang up.

Answer a Call Waiting

Note: You can enable/disable the Call Waiting feature using the Web Configuration Tool.
Access the Web Configuration tool's Feature Configuration page (see page 3).
The Navigator allows a maximum of two calls waiting while you are on a call. New calls wait on
the next free line. When a new call arrives, you hear a call waiting tone, the name of the new
caller appears, and the corresponding Line key flashes. If all lines are busy, callers hear a busy
signal.
To answer a waiting call:
•
Press the flashing Line key of the call waiting. The current call is put on hold, and you are
connected to the new caller.
To return to the original call:
•
Press the associated flashing Line key.

Calling and Called Party Display

SIP phones display the true (programmed) identity of the called/calling party rather than the
standard number/name display.
NAVIGATOR - SIP User and Administrator Guide
27