System Settings - Datamax M-class Mark II Operator's Manual

System Settings

The System Settings menu contains label formatting, operation, and control functions:
Menu Mode
Configuration File
Internal Module D *
Default Module *
Scaleable Font Cache *
Single Byte Symbols *
Double Byte Symbols *
Time And Date
Media Counters *
Print Configuration *
Configuration Level *
Set Factory Defaults *
Format Attributes *
Label Rotation
Imaging Mode *
Pause Mode *
Peel Mode *
Security *
Units Of Measure *
Input Mode *
DPL Emulation *
Column Emulation *
Row Emulation *
SOP Emulation *
Back After Print *
Backup Delay (1/50s) *
Font Emulation *
Label Store *
Menu Language
Fault Handling *
Items denoted with an asterisk (*) are only accessible through the Advanced Menu.
The menu selections are defined as follows:
DISPLAYED ITEM
MENU MODE
USER MENU
ADVANCED
MENU
CONFIGURATION
FILE
RESTORE AS
CURRENT *
SAVE SETTING
AS
DELETE FILE *
FACTORY
SETTING FILE *
Chapter 4 – Menu System
Sets the menu system access level, where:
Accesses a limited menu of basic controls. (Default Setting)
Accesses the full menu of controls, settings, and diagnostics.
Controls the creation, storage, and recall of printer configuration files, where:
Returns the printer to a previously saved configuration.
Creates a file based on the current printer configuration, as described here.
Removes a selected configuration file from memory. (An active file cannot be
deleted.)
Provides a list of available configuration files used to restore the printer's
configuration following a Level One Reset or when YES is selected in the SET
FACTORY DEFAULTS menu. (NONE is the default file setting.)
ITEM DESCRIPTION
33