Ipnp Commands Example - ZyXEL Communications UAG Series User Manual

23.3 IPnP Commands Example

The following example enables IPnP on the UAG and interface lan1. It also displays the IPnP
settings.
Router# configure terminal
Router(config)# ip ipnp activate
Router(config)# ip ipnp config
Router(ipnp)# interface lan1
Router(ipnp)# exit
Router(config)# show ip ipnp activation
IPnP Status: yes
Router(config)# show ip ipnp interface
interface
===============================================================================
lan1
Router(config)#
UAG CLI Reference Guide
Chapter 23 IPnP
141