29.1 Payment Service Overview
The online payment service allows users to purchase access time online with a credit card. You
must register with the supported credit card service before you can configure the UAG to handle
credit card transactions.
29.2 Payment-service Commands
The following table identifies the values required for many of these commands. Other input values
are discussed with the corresponding commands.
Table 93 Input Values for payment-service Commands
LABEL
message
The following table lists the payment-service commands. You must use the
command to enter the configuration mode before you can use these commands.
terminal
Table 94 payment-service Commands
COMMAND
payment-service account-delivery
onscreen {activate | deactivate}
payment-service account-delivery sms
{activate | deactivate}
[no] payment-service activate
payment-service check payment-all-
currency
payment-service check payment-currency
payment-service check paypal-currency
payment-service fail-page failed-
message message
UAG CLI Reference Guide
C
DESCRIPTION
A note that displays in a custom online payment service page. You may use up to
1024 printable ASCII characters. Spaces are allowed.
DESCRIPTION
Allows or disallows the UAG to display the user account information in the
web screen.
Allows or disallows the UAG to use Short Message Service (SMS) to send
account information in a text message to the user's mobile device.
Enables online payment service.
The no command disables online payment service.
Diaplays the name of online payment service provider and checks if the
currency unit for billing and the currency unit for online payment are the
same.
Checks if the currency unit for billing and the currency unit for online
payment are the same.
Checks if the currency unit for billing and the currency unit for online
payment using PayPal are the same.
Specifies a note to display when the user's online payment failed.
HAPTER
Payment Service
2 9
configure
161