The following example shows all activated 1-to-1 NAT rules.
Router> show system snat nat-1-1
No.
VS Name
===========================================================================
The following example shows the default WAN trunk settings.
Router> show system snat default-snat
Incoming
===========================================================================
Internal Interface
Internal Interfaces: lan1, lan2, dmz
External Interfaces: wan1, wan2, wan1_ppp, wan2_ppp
Router>
UAG CLI Reference Guide
Source
Destination
Outgoing
External Interface
Chapter 55 Packet Flow Explore
Outgoing
SNAT
SNAT
Outgoing Interface IP
287