Vpn-1-1-Map Rule Command Examples; Vpn-1-1-Map Statistics Command Examples - ZyXEL Communications UAG Series User Manual

Table 67 vpn-1-1-map rule Sub-commands (continued)
COMMAND
[no] pool profile_name
[no] user {user_name|any}

16.2.4 vpn-1-1-map rule Command Examples

The following commands create a VPN 1-1 mapping rule, enable it and display the settings.
Router# configure terminal
Router(config)# vpn-1-1-map rule 1
Router(vpn-1-1-map-rule-1)# activate
Router(vpn-1-1-map-rule-1)# pool pool1
Router(vpn-1-1-map-rule-1)# pool pool2
Router(vpn-1-1-map-rule-1)# user Michael
Router(vpn-1-1-map-rule-1)# exit
Router(config)# show vpn-1-1-map rule
Rule: 1
active: yes
user: Michael
pool: pool1,pool2
Router(config)#

16.2.5 vpn-1-1-map statistics Command Examples

The following command shows statistics for each of the VPN 1-1 mapping rules. This displays how
many times the UAG applied the rule to a user successfully or failed to apply the rule to a user. This
also shows the maximum number of times the UAG has applied the rule to a user successfully.
Router# show vpn-1-1-map statistics summary
Rule: 1
active: yes
user: Michael
pool: pool1
assigned: 0
failed: 0
peak usage: 0
Router#
UAG CLI Reference Guide
DESCRIPTION
Sets the name of the pool profile used by this rule. You can associate up
to four pool profiles to a VPN 1-1 mapping rule. The no command
removes the specified pool file.
Sets the user or user group for which you want to use this rule. The no
command resets the user setting to the default (any). any means all
users.
Chapter 16 VPN 1-1 Mapping
123