ZyXEL Communications UAG Series User Manual page 212

Chapter 39 Services
Table 127 object-group Commands: Service Groups (continued)
COMMAND
[no] description description
object-group service rename group_name
group_name
39.2.2.1 Service Group Command Examples
The following commands create service ICMP_ECHO, create service group SG1, and add
ICMP_ECHO to SG1.
Router# configure terminal
Router(config)# service-object ICMP_ECHO icmp echo
Router(config)# object-group service SG1
Router(group-service)# service-object ICMP_ECHO
Router(group-service)# exit
Router(config)# show service-object ICMP_ECHO
Object name
===========================================================================
ICMP_ECHO
Router(config)# show object-group service SG1
Object/Group name
===========================================================================
ICMP_ECHO
212
DESCRIPTION
Sets the description to the specified value. The
description.
description: You can use alphanumeric and
characters, and it can be up to 60 characters long.
Renames the specified service group from the first group_name to the
second group_name.
Protocol Minmum port
ICMP 8
Type Reference
Object 1
command removes the
no
()+/:=?!*#@$_%-
Maxmum port Ref.
8 1
UAG CLI Reference Guide