ZyXEL Communications UAG Series User Manual page 173

Table 101 bwm Sub-commands (continued)
COMMAND
[no] service service-object {service_name |
any}
show
[no] source address_object
[no] type {per-user | shared}
[no] user user_name
UAG CLI Reference Guide
Chapter 33 Bandwidth Management
DESCRIPTION
Specifies a service or service group to identify the type of
traffic to which this policy applies.
any: the policy is effective for every service.
The no command resets the service to the default (any).
Displays the policy settings.
Sets the source IP address or address group for whom this
policy applies.
The no command resets the source IP address(es) to the
default (any). any means all IP addresses.
Sets the type of bandwidth management.
per-user: to allow every user that matches this policy to
use up to the bandwidth configured in this policy.
shared: to have users that match this policy to share the
bandwidth configured in this policy.
The no command resets the bandwidth management type
to the default (shared).
Sets a user name or user group to which to apply the
policy.
The command resets the user name to the default
no
(any). any means all users.
173