Recommended Maintenance Schedule - Toro Workman
3300–D Operator's Manual

Recommended Maintenance Schedule

Maintenance Service
Interval
After first 10 hours
After first 50 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Every 800 hours
Every 1200 hours or 2
years (whichever
occurs first)
1
immediately after every washing, regardless of the interval listed
Important Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
• Check cable adjustments
• Torque wheel lug nuts
• Check alternator and fan belts
• Replace transaxle filter
• Replace the engine oil and filter.
• Torque cylinder head and adjust valves
• Check the battery fluid level.
• Check the battery cable connections.
• Service the air cleaner.
• Lubricate all grease fittings
• Inspect condition and wear of tires
• Check front differential oil level (4WD)
• Replace engine oil and filter
• Inspect cooling system hoses
• Check cable adjustments
• Check alternator and fan belts
• Service air cleaner filter
• Check front axle CV boot joint (4WD)
• Check engine RPM (idle and full throttle)
• Torque wheel lug nuts
• Check front wheel alignment
• Inspect service and parking brakes
• Inspect fuel lines
• Replace electric fuel pump filter
• Replace fuel/water separator filter
• Adjust valves
• Replace transaxle filter
• Change transaxle oil
• Clean transaxle strainer
• Pack front wheel bearings
• Change front differential oil (4WD)
• Replace all interlock switches
• Coolant System – flush/replace fluid
• Fuel tank – Drain/flush
• Change brake fluid
38