Maintenance; Recommended Maintenance Schedule(S) - Toro 07384 Operator's Manual

Maintenance

Note:
Determine the left and right sides of the machine from the normal operating position.
Note:
Download a copy of the electrical schematic by visiting
from the Manuals link on the home page.
Important:
Refer to your engine owner's manual for additional maintenance procedures.
WARNING
Failure to properly maintain the machine could result in premature failure of machine systems,
causing possible harm to you or bystanders.
Keep the machine well maintained and in good working order as indicated in these instructions.
CAUTION
Only qualified and authorized personnel should maintain, repair, adjust, or inspect the machine.
• Avoid fire hazards and have fire-protection equipment present in the work area. Do not use
an open flame to check fluid levels or leakage of fuel, battery electrolyte, or coolant.
• Do not use open pans of fuel or flammable cleaning fluids for cleaning parts.
CAUTION
If you leave the key in the key switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the key switch and disconnect the wires from the spark plugs before
you do any maintenance. Set the wires aside so that they do not accidentally contact the
spark plugs.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 2 hours
After the first 10 hours
After the first 50 hours
After the first 100 hours
Before each use or daily
Maintenance Procedure
• Torque the front and rear wheel lug nuts.
• Check the adjustment of the shift cables.
• Torque the front and rear wheel lug nuts.
• Check the adjustment of the parking brake.
• Check the condition and tension of the alternator belt.
• Replace the hydraulic filter.
• Change the high-flow hydraulic fluid filter (TC models only).
• Change the engine oil and filter.
• Adjust the engine-valve clearance.
• Perform the guidelines for breaking in a new machine.
• Check the tire pressure.
• Check the operation of the safety-interlock system.
• Check the engine-oil level.
• Check the engine-coolant level.
• Remove debris from the engine area and radiator. (Clean it more frequently in
dirty conditions.)
• Check the brake-fluid level. Check the brake-fluid level before you first start the
engine.
• Check the transaxle/hydraulic-fluid level. (Check the fluid level before the engine
is first started and every 8 hours or daily, thereafter.)
www.Toro.com
30
and searching for your machine