Maintenance; Sound Power Level; Sound Pressure Level; Vibration Level - Toro Workman
3300–D Operator's Manual

– Set parking brake.
– Remove key from ignition.
– Block wheels if machine is on an incline.

Maintenance

• Before servicing or making adjustments to the machine,
stop engine, set parking brake and remove key from
ignition to prevent accidental starting of the engine.
• Never work under a raised bed without placing bed
safety support on fully extended cylinder rod.
• Make sure all hydraulic line connectors are tight, and all
hydraulic hoses and lines are in good condition before
applying pressure to the system.
• Keep body and hands away from pin hole leaks or
nozzles that eject hydraulic fluid under high pressure.
Use paper or cardboard, not hands, to search for leaks.
Hydraulic fluid escaping under pressure can have
sufficient force to penetrate skin and do serious damage.
If fluid is injected into the skin it must be surgically
removed within a few hours by a doctor familiar with
this form of injury or gangrene may result.
• Before disconnecting or performing any work on the
hydraulic system, all pressure in system must be
relieved by stopping engine, cycling dump valve from
raise to lower and/or lowering box and attachments.
Place the remote hydraulics lever in the float position. If
box must be in raised position, secure with safety
support.
• To make sure entire machine is in good condition, keep
all nuts, bolts and screws properly tightened.
• To reduce potential fire hazard, keep the engine area
free of excessive grease, grass, leaves and accumulation
of dirt.
• If the engine must be running to perform a maintenance
adjustment, keep hands, feet, clothing, and any parts of
the body away from the engine and any moving parts.
Keep everyone away.
• Do not overspeed engine by changing governor settings.
Maximum engine speed is 3650 rpm. To assure safety
and accuracy, have an Authorized TORO Distributor
check maximum engine speed with a tachometer.
• If major repairs are ever needed or assistance is
required, contact an Authorized TORO Distributor.
• To be sure of optimum performance and safety, always
purchase genuine TORO replacement parts and
accessories. Replacement parts and accessories made by
other manufacturers could be dangerous. Altering this
vehicle in any manner may affect the vehicle's
operation, performance, durability or its use may result
in injury or death. Such use could void the product
warranty of The TORO Company.
• This vehicle should not be modified without the TORO
Company's authorization. Direct any inquiries to The
TORO Company, Commercial Division, Vehicle
Engineering Dept., 300 West 82nd St., Bloomington,
Minnesota 55420–1196. USA

Sound Power Level

This unit has a guaranteed sound power level of
100 dBA/1 pW, based on measurements of identical
machines per Directive 2000/14/EC and amendments.

Sound Pressure Level

This unit has an equivalent continuous A-weighted sound
pressure at the operator ear of: 88 dB(A), based on
measurements of identical machines per Directive
98/37/EC and amendments.

Vibration Level

Hand-Arm
This unit does not exceed a vibration level of 2.5 m/s
the hands based on measurements of identical machines per
ISO 5349 procedures.
Whole Body
This unit does not exceed a vibration level of 0.5 m/s
the posterior, based on measurements of identical machines
per ISO 2631 procedures.
6
2
at
2
at