Table of Contents
Advertisement
Maintenance
Note:
Determine the left and right sides of the machine from the normal operating position.
Note:
Download a copy of the electrical schematic by visiting www.Toro.com and searching for your machine
from the Manuals link on the home page.
Important:
Refer to your engine owner's manual for additional maintenance procedures.
WARNING
Failure to properly maintain the machine could result in premature failure of machine systems
causing possible harm to you or bystanders.
Keep the machine well maintained and in good working order as indicated in these instructions.
CAUTION
Only qualified and authorized personnel should maintain, repair, adjust, or inspect the machine.
• Avoid fire hazards and have fire-protection equipment present in the work area. Do not use
an open flame to check fluid levels or leakage of fuel, battery electrolyte, or coolant.
• Do not use open pans of fuel or flammable cleaning fluids for cleaning parts.
CAUTION
If you leave the key in the key switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the key switch and disconnect the wires from the spark plugs before
you do any maintenance. Set the wires aside so that they do not accidentally contact the
spark plugs.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first 2 hours
After the first 10 hours
After the first 50 hours
After the first 100 hours
Maintenance Procedure
• Torque the front and rear wheel nuts.
• Torque the front and rear wheel nuts.
• Check the adjustment of the parking brake.
• Replace the hydraulic filter.
• Change the engine oil and filter.
• Inspect the opening on the filter.
• Check the transmission-fluid level.
• Perform the guidelines for breaking in a new machine.
31
Advertisement
Table of Contents
