Manual Density Adjustment Setting - Oki B721 Maintenance Manual

Oki Data CONFIDENTIAL

4.5 Manual density adjustment setting

C811/C822/C831/C841 is shipped with the auto density adjustment mode enabled. When the
mode is disabled by a user, the printer may print density out of adjustment while being used.
Manually perform density adjustment setting when the printer prints an improper density.
Note! The setting must be performed with the printer in a static state. Do not perform
it while the printer warms up.
(1) Press the MENU or MENU
button when Calibration appears.
(2) Press the MENU or MENU
ENTER button.
(3) Press the ENTER button.
Auto density adjustment starts, the operator panel display providing a message
stating that density is being adjusted.
45487001TH Rev.1
button more than one time. Press the ENTER
button to select Adjust Density Execute. Press the
4. Maintenance menus
4-38 /