Oki B721 Maintenance Manual page 104

Oki Data CONFIDENTIAL
Item
Admin Others Security Make
Setup Setup Setup Secure
HDD
Make
Normal
HDD
Reset
Cipher
Key
Language Language
Setup Initialize
Job Cancel
Cancel Key
Setup Behavior
Inquiry
Display
Focus
Position
Display
Timeout
45487001TH Rev.1
Settings Functions
Execute Enables the encryption function for data
stored in HDD.
Generates a cipher key and makes the
encryption function (security mode)
information available. In addition, formats
HDD.
Execute Disables the encryption function for data
stored in HDD.
Deletes the cipher key and makes the
encryption function (security mode)
information not available. In addition,
formats HDD.
Execute Resets a cipher key to be used in an
encrypted hard disk.
When this processing is done, all of data
stored in the HDD cannot be restored.
Execute Initialize the message file loaded in
FLASH.
Short Specify the behavior when Cancel button
Long is pressed in printing.
Off Short: Cancel the current job by pressing
Cancel button below 2 seconds.
Long: Cancel the current job by pressing
Cancel button in 2 - 5 seconds.
Off: Ingore the press of Cancel button. The
printing can not be cancelled by pressing
cancel button.
On Specify whether the Job Cancel selection
Off request will be displayed.
On: Display when Job Cancelling.
Off: Do not displasy.
Yes Specify the default selection of Job Cancel
No request.
60 Specify the timeout of Job Cancel
~ selection request. When the time passed,
180 the printing will be continued as Job
~ Cancel = No.
300
Item
Admin Setup Settings Reset
Settings
Save
Settings
Restore
Settings
Change New
Password Password
Verify
Password
*L: The default value for destinations that accept Letter as default.
*A: The default value for destinations that accept A4 as default.
4. Maintenance menus
Settings Functions
Execute Resets a part of user menu to the factory
default.
Execute Saves menus currently set.
With this function, the menus with which
operation was last performed are saved,
and overwrites with them menus that were
previously saved.
Execute Changes to the menu setting saved.
[Conditions for display]
The menu settings are saved.
************ Sets a new password to enter "Admin
Setup" menu
From 6 to 12 digits of number or Roman
character can be enter.
************ Makes User input the new password to
enter "Admin Setup" menu which is set by
"New Password" for confirmation.
From 6 to 12 digits of number or Roman
character can be enter.
4-19 /