Network Interface Specifications; Network Interface Overview; Network Interface Connector And Cable; Network Interface Signals - Oki B721 Maintenance Manual

Oki Data CONFIDENTIAL

1.5.2 Network interface specifications

1.5.2.1

Network interface overview

Basic specifications
TCP/IP spec. Network layer
ARP , IPv4, IPv6, ICMP , ICMPv6, IPSec
Transport layer
TCP , UDP
Application layer
LPR, Port9100, FTP , HTTP , HTTPS, IPP , SNMPv1/v3, TELNET,
DHCP/BOOTP , DNS, DDNS, WINS, UPnP , Bonjour, SNTP , SMTP ,
ODNSP , Windows Rally (WSD Print, PnP-X, LLTD)
NBT: NetBIOS over TCP
IEEE 802.1X: EAP-TLS, PEAP
1.5.2.2

Network interface connector and cable

(1) Connector
1000BASE-T/100BASE-TX/10BASE-T
(Auto switch, cannot be used simultaneously)
Connector pins arrangement
(2) Cable
Non-shield twisted-pair cable with RJ-45 connector
(Category 5e is recommended)
45487001TH Rev.1
1 8
1.5.2.3

Network interface signals

(1) 10/100Base-T
Pin No. Signal name
1 TXD+
2 TXD-
3 RXD+
4 −
5 −
6 RXD-
7 −
8 −
(2) 1000Base-T
Pin No. Signal name
1 TRD+(0)
2 TRD-(0)
3 TRD+(1)
4 TRD+(2)
5 TRD-(2)
6 TRD-(1)
7 TRD+(3)
8 TRD-(3)
Direction Function
FROM PRINTER Transmission data +
FROM PRINTER Transmission data -
TO PRINTER Receive data +
− Not use
− Not use
TO PRINTER Receive data -
− Not use
− Not use
Direction Function
bi-direction Data0+ transmission and reception
↑
Data0-transmission and reception
↑
Data1+ transmission and reception
↑
Data2+ transmission and reception
↑
Data2-transmission and reception
↑
Data1- transmission and reception
↑
Data3+ transmission and reception
↑
Data3-transmission and reception
1. Configuration
1-9 /