Oki Data CONFIDENTIAL
5.5 About the manual setup of Print density adjustment
The printer is shipped out of the factory with its automatic density correction mode set to
"Auto". However, if that mode is changed to "Manual" by the user, the density setting may be
displaced with the use along the time. Execute this manual setup when the density appears
below par.
Note! Make the setup when the printer remains at a standstill. Do not conduct it
during warming-up.
(1) Press the MENU
or MENU
MENU] is displayed, press the ENTER key.
or MENU
(2) Press the MENU
RESET] to be displayed.
(3) Press the ENTER key. [ONLINE/ DENSITY ADJUSTING] is displayed, and
Automatic Print Density Adjustment will start.
44072903TH Rev.1
key several times, and when [COLOR
key to cause [DENSITY ADJUSTMENT/
5. MENTENANCE MENUS
139 /