Switching From Automatic Navigation To Standby Mode; Autopilot Interface - Lowrance ELITE Ti Operator's Manual

Switching from automatic navigation to
standby mode
To switch from autopilot to handheld remote or foot pedal steering,
set the autopilot to standby mode. You can select standby mode
from the Autopilot Controller or the System Controls dialog.

Autopilot interface

1
Autopilot information bar
2
Autopilot Controller
The Autopilot Controller
The autopilot is controlled from the Autopilot Controller,
activated from the System Controls dialog displayed by pressing
the Power key.
You can select the position of the Autopilot Controller on the page.
Refer to "Autopilot settings" on page 90.
Note: As long as the Autopilot Controller is active, you
Ú
cannot operate the background panel or its menu.
The Autopilot Controller can also be set up as a panel in a split
panel page by using the Page Editor to make a Favorite page. For
Trolling motor autopilot | ELITE Ti Operator Manual
85