Ep-15 Fluid Level Configuration; To Input Device Name; To Select Tank Instance (Location) - Lowrance LMS-522c iGPS Installation And Operation Instructions Manual

vanced Options menu, only the settings for the Port Fuel Flow will be
reset to factory defaults. Other fuel flows on the network will not be
affected.
To restore default settings:
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Use ↑ ↓ to select the desired fuel flow and press
Configuration menu will appear.
4. Highlight
A
5. Select
R
ESTORE
appear: Are you sure you wish to change this device's configuration?
6. Highlight
Y
main display.

EP-15 Fluid Level Configuration

To input Device Name:

1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Select a fluid level you want to rename and press
Configuration menu will appear with the Device Name dialog box high-
lighted.
and use ↑ ↓, ← → to input the desired name for the fluid
4. Press
ENT
level. Press
ENTER
play.

To select Tank Instance (Location):

1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Select the desired fluid level and press
tion menu will appear.
, use ↑ ↓ to select
and press
S
US ETUP
O
DVANCED PTIONS
and press
D
EFAULTS
and press
ENT
ES
, use ↑ ↓ to select
and press
S
US ETUP
. Press
EXIT
, use ↑ ↓ to select
and press
S
US ETUP
NMEA 2000
, which will open the Bus Configu-
ENT
and press
ENT
. The following message will
ENT
. Press
EXIT
NMEA 2000
, which will open the Bus Configu-
ENT
repeatedly to get back to the main dis-
NMEA 2000
, which will open the Bus Configu-
ENT
215
and press
ENT
.
repeatedly to get back to the
and press
ENT
and press
. The Device Configura-
ENT
. The
ENT
. The Device
. The
ENT
. The Device
. The
ENT