Par 1 Strobe Adj; Reports; Event Log; Display Log - Lexmark X925 Service Manual

7541-03x

Par 1 Strobe Adj

Parallel Strobe Adjustment enables you to change the amount of time the strobe is sampled in order to
determine if data is available on the parallel port. Increasing the value increases the amount of time by 50 ns per
increment. Decreasing the value decreases the sample time by 50 ns per increment.
Touch Back to return to the Diagnostics menu.

REPORTS

From this menu you can print the Menu Settings Page or the Event Log.

EVENT LOG

Display Log

Display Log shows the message that appeared on the operator panel for each event in the log, starting with the
most recent. Use the touch-screen arrows to scroll through the log entries. To see more in-depth information
about each event, print the event log using the Print Log menu item.
Touch Back to return to the EVENT LOG menu.
3-26
Service Manual