Assembly Instructions - Spirit CT850 Owner's Manual

Assembly Instructions

Step 1: Uprights
1. The right upright (34)
uprights on the frame base, special care must be taken not to pinch the computer cable between
the upright and frame base. Use first 3/8"-16 × 3"_Button Head Socket Bolt (144) together with
3/8'' × 16.5 × 2.0 × 4H_Split Washer (117), and 3/8" × 35 × 2T_Flat Washer (116) through the
top hole in the retaining plate (98), and corresponding top hole in the upright tube, and screw
into the base frame. Now install the other two bolts 3/8"-16 × 3"_Button Head Socket Bolt (144)
together with 3/8'' × 16.5 × 2.0 × 4H_Split Washer (117), and 3/8" × 35 × 2T_Flat Washer (116)
and tighten all three bolts up.
2. Repeat the above step to install left upright (33).
3. Use four M5 × 12L_Phillips Head Screws (134)
27).
CUSTOMER SERVICE 1-888-707-1880
EMAIL:
customerservice@dyaco.ca
is preinstalled with the lower computer cable A
to install the left and right motor base cap (26,
8
(42). To install the
Dyaco Canada Inc. 2014