Treadmill Features - Spirit CT850 Owner's Manual

Quick-Start Operation:
• Press and release the START key to begin belt movement at 0.5 mph/0.8 kph, then adjust
to the desired speed using the FAST keys.
Reduce the treadbelt speed
•
• T o stop the

TREADMILL FEATURES:

Pause/Stop/Reset:
• When the treadmill is running the pause feature may be utilized by pressing the STOP key
once. This will slowly decelerate the tread-belt to a stop. The incline stays at that level and
Time, Distance and Calorie readings will hold while the unit is in the pause mode. After 5
minutes the display will reset and return to the start up screen.
• To resume your exercise with previous speed and incline settings when in Pause mode,
press the START key.
• Pressing the STOP key twice will end the program and a workout summary will be
displayed. If the STOP button is pressed a third time, the console will return to the idle
mode (start up) screen.
• If the STOP button is held down for more than 3 seconds the console will reset.
• When you are setting data, such as age and time, for a program pressing the STOP key will
allow you to go back one step for each key press.
Incline:
• Incline may be adjusted anytime after the belt starts moving.
Press and hold the UP or DOWN keys to achieve desired level of effort.
•
Dot Matrix Center Display:
Ten rows of dots indicate each level of a workout in manual mode. The dots are only to show an
approximate level (speed/incline) of effort. They do not necessarily indicate a specific value - only
an approximate percent to compare levels of intensity. In Manual Operation the Speed / Incline dot
matrix window will build a profile "picture" as values are changed during a workout. There are
twenty-four columns, indicating time. The 24 columns are divided into 1/24
program. When the time is counting up from zero (as in quick start) each column represents 1
minute.
Next to the Dot Matrix window are three LED lights labeled: Track, Speed and Incline, along with a
DISPLAY button. When the Track LED is lit the dot matrix displays the Track profile, when the
Speed LED is lit the Dot matrix displays the Speed profile and when the Incline LED is lit the Dot
Matrix displays the Incline profile. You may change the Dot Matrix profile view by pressing the
DISPLAY button. After scrolling through the three profiles the Dot matrix will automatically scroll
through the three displays showing each one for four seconds. The LED associated with each
profile will blink while that view is displayed. One more press of the DISPLAY button will return you
to the Track profile.
CUSTOMER SERVICE 1-888-707-1880
EMAIL:
customerservice@dyaco.ca
using the SLOW key to the desired speed.
treadbelt press and release the STOP key.
12
th
of the total time of the
Dyaco Canada Inc. 2014