Spirit CT800 Owner's Manual
Hide thumbs
Also See for CT800:
- Owner's manual (46 pages) ,
- Operation manual (21 pages) ,
- Owner's manual (31 pages)
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Z500
Z100 / Z300
Z700
CT800
T readmill
SPT0061
OWNER'S MANUAL
Please carefully read this entire manual before operating your new treadmill
Advertisement
Related Manuals for Spirit CT800
Summary of Contents for Spirit CT800
- Page 1 Z500 Z100 / Z300 Z700 CT800 T readmill SPT0061 OWNER’S MANUAL Please carefully read this entire manual before operating your new treadmill...
- Page 2 Table of Contents Important Safety Instructions……………………………………………………………………… 3 Important Electrical Information…………………………………………………………………… 4 Important Operation Instructions………………………………………………………………….. 5 Assembly instructions………………………………………………………………………………. 6 Operation of Your New Treadmill………………………………………………………………….. 11 Programmable Features……………………………………………………………………………. 14 Fitness Test…………….…………………………………………………………………………… 15 Target Heart Rate…………………………………………………………………………………... 19 Using a Heart Rate Transmitter…………………………………………………………………… 20 Heart Rate Control Operation……………………………………………………………………...
- Page 3 Congratulations on your new treadmill and welcome to the Spirit family! Thank you for your purchase of this quality treadmill trainer. Your new treadmill was manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available.
- Page 4 Important Safety Instructions WARNING - Read all instructions before using this appliance. DANGER - To reduce the risk of electric shock disconnect your SPIRIT treadmill from the electrical outlet prior to cleaning and/or service work. WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install the treadmill on a flat level surface with access to a 230-volt AC, 10-amp grounded outlet.
- Page 5 Important Electrical Information WARNING! NEVER use a RCD - Residual Current Device (U.S. ver.= GFCI) - wall outlet with this treadmill. As with any appliance with a large motor, the RCD/GFCI will trip often. Route the power mains cord away from any moving part of the treadmill including the elevation mechanism and transport wheels.
- Page 6 These distractions may cause you to lose balance or stray from walking in the center of the belt; which may result in serious injury. NEVER mount or dismount the treadmill while the belt is moving. SPIRIT treadmills start at a very ●...
- Page 7 Assembly Pack Check List Step1 #59 - 3/8" #58 - 3/8" Flat Washer (6 pcs) Split Washer (6 pcs) #73 – M5 x 12mm #104 – 3/8” x 3-3/4” Phillips Head Screw (4 pcs) Button Head Socket Bolt (6 pcs) Step2 #125 - M5 #73 - M5 x 12mm...
- Page 8 Assembly Instructions Step 1: Upright Tubes • The right side upright tube (19) has the computer cable (A)(87) pre-installed. Lift the tube off the walking surface and attach it to the base frame. You need to gently pull on the computer cable as you line up the upright tube, taking the slack out, so the cable does not get pinched between the tube and the base frame.
- Page 9 Step 2: Console Assembly • Connect together the mating computer cables (G(86) & C(120)), hand pulse cables (D(122) & F(88), right and B(28) & E(88), Left) and attach the ground cable (H)(121) to the hole (I) in the steel frame with a M5 x 12 mm screw (73) and a M5 star washer (125) . •...
- Page 10 IMPORTANT ASSEMBLY INSTRUCTION When assembling the console mounting interface brackets (Items 3&4) please be sure to slide the brackets all the way towards the back of the console before tightening the bolts.
- Page 11 Step 3: Console Assembly to Upright Tubes • Attach the two interface mounts (3 left & 4 right) to the console assembly frame with six M8 x 12mm screws (108). • Connect the console computer cable (C)(120) to the mating cable (A)(87) from the upright tube.