Spirit CT850 Owner's Manual page 32

Hide thumbs Also See for CT850:
Table of Contents

Advertisement

Maintenance menu:
1) Remove the safety key and press SPEED and ENTER keys at the same time then return the
safety key until "ENGINEERING MODE" is displayed, press ENTER again.
2) You can now scroll through the menu using the UP /DOWN or FAST/SLOW keys. Use the
ENTER key to run. Use the STOP key to return to previous menu selection. The menu
selections are:
1) Key Test – Press each key to verify it is functioning correctly. Press ENTER key to run.
2) Display test - Lights all LED lights. Press ENTER key to run.
3) Functions (Press ENTER key into this function)
i.
Sleep - Turns sleep mode on or off. When off, display is always lit.
Pause - Turns pause mode on or off. When on, Pause lasts 5 minutes.
ii.
iii.
Maintenance – Reset odometer reading.
Units - Set display to English or Metric readings
iv.
v.
Grade Return (GS Mode) - Returns the elevation to lowest setting when pause is
pressed
vi.
Beep – Turns the speaker (beep sound) on or off.
4) Security –Sets the Child Lock function. This function locks out the keypad until a
pre-determined key sequence is pressed. When "Child Lock" is on, at the time power
is on and before idle mode, MW will displays "
key 0 and Enter at the same time to unlock console and return to idle mode.
5) Press STOP key to exit and return idle mode.
Setting mileage lock:
1) Remove the safety key, press and hold numeric keys 1, 2, 3 at the same time then return the
safety key to enter setting function.
2) Message window will display "LOCK SETTING = ON/OFF".
3) Press FAST/SLOW/UP/DOWN keys to set On or Off then press ENTER.
4) If Off is set, it returns to idle mode. If On is set, it enters code setting procedure.
5) Now message window will display "PASSWORD=
4-digit security code. Press ENTER when complete.
6) Enter the code again to confirm. Press Enter when complete.
7) Now message window will show "MILEAGE XXX Km". Use UP/DOWN or FAST/SLOW keys
to set the required mileage. Press ENTER r when complete. Now MW window will show "Lock
Setting OK" and return to idle mode.
8) To unlock, press and hold numeric keys 1, 2, 3 at the same time to enter unlocking function.
CUSTOMER SERVICE 1-888-707-1880
EMAIL:
customerservice@dyaco.ca
C O N S O L E L O C K E D
C O N S O L E L O C K E D
C O N S O L E L O C K E D
C O N S O L E L O C K E D
" . Use numeric keys in order to set a
* * * *
31
" you must press numeric
Dyaco Canada Inc. 2014

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents