Printing The Amount Of Remaining Media - Roland VersaArt RE-640 User Manual

Printing the Amount of Remaining Media

This prints the amount of media remaining that is displayed at the top menu.
Procedure

Press .

MENU
SHEET REMAIN

SHHET REMAIN
PRINT MEMO

W1200mm
SETUP SHEET
Description
You use this when you want to make a record of the remaining length of the media now in use. Printing the
amount of media remaining before you change the media enables you to refer to the printed record and use
the value to make the setting for the remaining amount the next time you use the media.
Note, however, that continuing by performing the next output starts the output on top of the portion where
the amount of remaining media is printed. After printing the amount remaining, then before you perform the
next output operation, we recommend cutting off the media.
Press to display the left figure.
Press .
Press .
Start printing.
Press to go back to the original screen.
Output Operation Management
5
109