Panel Menus; Ppds Emulation; Demo Mode; Factory Defaults - Lexmark C78x Service Manual

Panel Menus

Disabling Panel Menus prohibits users from modifying any setting or executing any operation available in the
Ready Menu group.
1.
Select Panel Menus from the Config Menu.
2.
Select Disable or Enable.
Enable is the default.

PPDS Emulation

This only displays if the PPDS interpreter is available.
1.
Select PPDS Emulation from the Config Menu.
2.
Select Activate or Deactivate.

Demo Mode

This printer supports a demo mode that is usually used in retail environments to illustrate the features of the
printer. The printer features are illustrated by demonstration files stored in the RIP firmware, flash option, or disk
option.
1.
Select Demo Mode from the Config Menu.
2.
Select Activate or Deactivate.
Deactivate is the default value.

Factory Defaults

The customer can restore either the network settings or the base printer settings to their factory default values.
When Restore Base is selected, non-critical base printer NVRAM settings are restored. When Restore Network
is selected, all network NVRAM settings are restored to their factory default settings. This option is only
available on models with an integrated network adapter. In either case, Restoring Factory Defaults is displayed
after the operation is selected.
1.
Select Factory Defaults from the Config Menu.
2.
Select Restore Base or Restore Network.
Note: Restore Network is only listed on models that have integrated network support.

Energy Conserve

When Energy Conserve is on, the customer does not have access to disable the Power Saver function. When
Energy Conserve is off, Disable appears as an additional menu item in the Power Saver menu. This setting only
affects the values that are displayed in the Power Saver Menu.
1.
Select Energy Conserve from the Config Menu.
2.
Select On or Off.

EVENT LOG

The history of printer errors can be printed by selecting Print Log.
Note: This log can be printed from Diagnostics mode or the Configuration Menu, but the report from
Configuration menu contains the debug and secondary error codes that are not printed in the version from the
Diagnostics mode. The errors printed here do not necessarily match in number or in order those printed with
Display Log in Diagnostics. However, you can select additional options in Diagnostics mode, including Display
Log and Clear Log. For additional information, see
Print Quality Pages.
"ERROR LOG" on page 3-29. Errors are also shown on the
5061
3-33
Diagnostic aids