Memory Configuration - Lexmark C78x Service Manual

5061

Memory configuration

Optional memory is available in 128MB, 256MB, and 512MB DIMM. There is only one DIMM slot available for
optional memory.
DRAM memory
Standard
Maximum
Available memory options
Optional 128MB, 256MB and 512MB SDRAM DIMMs are available from Lexmark. The memory options are
168-pin synchronous DRAM DIMMs (dual in-line memory modules) meeting or exceeding the following
specifications:
•
100MHz or greater
•
4KB refresh rate
•
Unbuffered, non ECC
•
x32
•
3.3 V
Unpredictable results may occur if an attempt is made to operate the printer with memory other than SDRAM
DIMM memory with the stated specifications.
Flash Memory Options available are 32MB and 64MB.
Expansion
•
Memory slot for extra flash or DRAM
•
Expansion slot for optional interface cards
•
Code expansion slot (application solution firmware cards)
•
On-board hard disk interface (for optional hard disk)
Additional memory may be required for printing complex pages or full-page, high-resolution images in 1200
image quality at rated speeds.
1-8
Service Manual
Lexmark C77xn Lexmark C77xdtn
dn Lexmark C77, fn
256MB
640MB
Lexmark C78n
Lexmark C78xdn
256MB 256
768MB 768
Lexmark C78xdtn
256
768