Configuration Menu; Entering Config Menu; Exiting The Config Menu - Lexmark C78x Service Manual

Configuration Menu

The Configuration menu contains a set of menus, settings, and operations which are infrequently used by a
user. Generally, the options made available in this menu are used to configure a printer for operation.
Note: An asterisk (*) in the value list in the following menus indicates the default value.

Entering Config Menu

To enter the Configuration Menu:
1.
Turn off the printer.
2.
Press and hold
3.
Turn on the printer.
4.
Hold the buttons about 10 seconds (until the clock face appears).
The following are available from the Configuration Menu:
Configuration Menu
Reset Fuser Cnt
Black Only Mode
Prt Quality Pgs
Color Trapping
Tray Insert Msg
SIZE SENSING
Panel Menus
PPDS Emulation
Demo Mode
Factory Defaults
Energy Conserve
EVENT LOG
Auto Color Adjust
Paper Prompts
Env Prompts
Font Sharpening
Jobs On Disk
Disk Encryption
Exit Config Menu

Exiting the Config Menu

Select EXIT Config Menu to exit the Configuration menu and return to normal mode.
and .
See "Reset Fuser Cnt" on page 3-32
See "Black Only Mode" on page 3-32
See "Prt Quality Pgs" on page 3-32
See "Color Trapping" on page 3-32
See "Tray Insert Msg" on page 3-32
See "SIZE SENSING" on page 3-32
See "Panel Menus" on page 3-33
See "PPDS Emulation" on page 3-33
See "Demo Mode" on page 3-33
See "Factory Defaults" on page 3-33
See "Energy Conserve" on page 3-33
See "EVENT LOG" on page 3-33
See "Auto Color Adjust" on page 3-34
See "Paper Prompts" on page 3-34
See "Env Prompts" on page 3-34
See "Font Sharpening" on page 3-34
See "Jobs On Disk" on page 3-35
See "Disk Encryption" on page 3-35
5061
3-31
Diagnostic aids