200.07 Paper Jam Service Check - Lexmark C78x Service Manual

200.07 paper jam service check

S2 or narrow media sensor did not break in time.
Note: See "Printer sensors" on page
Step Actions and questions
1 Make sure the media installed in the tray meets
specifications.
Does the media meet specifications?
2 Check tray for the edge guide setting and media
loading. Edge guides should be adjusted against edge
of media. Media should be fanned and lay flat in the
tray.
Is the media properly loaded in the tray?
3
Remove the ITU and check for the jam at the second
transfer roll.
Is paper jammed at the second transfer roll?
200.16 paper jam service check
S2 or narrow media sensor made early.
Note: See "Printer sensors" on page
Step Actions and questions
1 Check tray for the edge guide setting and media
loading. Edge guides should be adjusted against edge
of media. Media should be fanned and lay flat in the
tray.
Is the media properly loaded in the tray?
2 Media may not have been cleared from a previous jam.
Is media in paper path?
5-3.
5-3.
Yes No
Go to step 2 Inform the
customer that
media loaded in
Tray x does not
meet
specification.
Go to step 3 Properly load
media.
Clear the jam. Contact your next
level of support.
Yes No
Go to step 2 Properly load
media.
Clear the paper Contact your next
path. level of support.
Diagnostic information
5061
2-31