Lexmark C78x Service Manual page 169

Utilities Menu (continued)
Menu selection Purpose
Remove Held Removes confidential and
Jobs held jobs from the printer
hard disk.
Format Flash Formats the flash memory.
Warning: Do not turn off
the printer while the flash
is formatting.
Defragment Flash Retrieves lost storage area
from resources that were
deleted from flash
memory.
Warning: Do not turn off
the printer while the flash
is defragmenting.
Format Disk Formats the printer hard
disk.
Warning: Do not turn off
the printer while the hard
disk is formatting.
Job Acct Stat Prints a listing of all job
statistics stored on the
hard disk, or clears all
statistics on the disk.
Color Alignment To print a color alignment
test page, which can be
used to properly align how
colors are printed.
Hex Trace Helps isolate the source of
a print job problem.
Coverage Provides an estimate of
Estimator the percent coverage of
cyan, magenta, yellow,
and black on a page. The
estimate is printed on a
separator page.
LCD Contrast Adjusts the contrast of the
operator panel display.
LCD Brightness Adjusts the brightness of
the operator panel display.
Values
Confidential Selecting a menu value only affects
jobs that are resident in the printer.
Held
Bookmarks, jobs on USB flash
memory devices, and other types of
Not Restored
held jobs are not affected.
All
Yes Deletes any data stored in flash
memory and prepares the flash
memory to receive new resources.
No Cancels the request to format the flash
memory and leaves current resources
stored in flash memory.
Yes Transfers all resources stored in flash
memory to printer memory and then
reformats the flash memory option.
When the format operation is
complete, the resources are loaded
back into flash memory.
No Cancels the request to defragment the
flash memory.
Yes Deletes any data stored on the hard
disk and prepares the device to
receive new resources.
No Cancels the request to format the hard
disk and leaves current resources
stored on the disk.
Print Prints all statistics available for the
most recent print jobs.
Clear Deletes all accumulated job statistics
from the hard disk.
Print Alignment No selections exist for this operation.
Page Pressing the Select button will print the
alignment page.
Set A–Set L You are prompted to enter alignment
values for each setting (A–L).
Activate With Hex Trace selected, all data sent
to the printer is printed in hexadecimal
and character representation. Control
codes are not executed.
Note: To exit Hex Trace, turn the
printer off, or reset the printer by
pressing Stop (
Off (default) Percent coverage is not printed.
On Prints the estimated percentage of
coverage for each color on a page.
1–10 5 is the default setting.
A higher value will make the display
appear lighter, a lower value makes
the display appear darker.
1–10 5 is the default setting.
A higher value increases the
brightness of the display, a lower value
decreases the brightness of the
display.
)
.
2-125
Diagnostic information
5061