Scope Of Delivery; Transport Damage - Spartherm XS 500 Installation And Operating Instructions Manual

Your local authority is responsible for implementing the Clean Air Act 1993
including designation and supervision of smoke control areas and you can
contact them for details of Clean Air Act requirements". Spartherm appliances
that have been recommended as suitable for use in smoke control areas are
identified by a suffix P3 in the model name. These models are recommended
for use in smoke control areas when burning solely dry wood logs. Wood
briquettes must not be burnt with these appliances in smoke control areas.
A fireplace cassette with the following characteristics:

Firebox made of refractory concrete/vermiculite

Primary and secondary airflow systems

Self-closing firebox door with a high temperature-resistant ceramic
glass panel

Heat-resistant gloves

Type plate (see 3.2 for attachment)
Please immediately check the goods on delivery (visual inspection). Note
any damage that may have occurred on your delivery note and then please
inform your fireplace fitter. Protect the visible parts of the cassette from soiling
or damage during installation.
Only approved transport aids with sufficient load-bearing capacity may
be used for transporting your fireplace cassette.
The following points must be observed for safe and uncomplicated transport:

The fireplace cassette must generally only be transported either in an
upright position or slightly inclined onto its rear!

If a hand truck is being used as a transport aid, this may only be
positioned at the rear of the cassette.

1.1. Scope of delivery

1.2.

Transport damage

framework PAGE - 8 -