Table of Contents
Advertisement
7 .4.5 Developer Clutch (K, Y, M, C)
Tools
Phillips Screwdriver #1, #2 Slotted Screwdriver #1
Disassembly Procedures
1.
Remove the side cover (R). (See the item 7.1.3.)
2.
Remove IOD2 Circut Card. base. (See the item 7.2.3.)
3.
Remove the C ring of the suspect developer clutch (K,Y,M, or C) from the shaft.
4.
Pull out the subject developer clutch from the shaft.
Assembly Procedures
1.
Install a new developer clutch to the shaft.
2.
Install the C ring to the shaft's groove, and fix the developer clutch.
3.
After the above , follow exactly the reverse order of disassembling procedures.
4.
Upon completion of the installation, connect the power supply cable.
158
SuperScript 4400 — Maintenance Guide
IOD2 P.W.B
Fuser Clutch
Cleaner Clutch
Registration Clutch
Developer Clutch
Advertisement
Chapters
Table of Contents
