Table of Contents
Advertisement
7 .1.4 Top Cover
Tools
Phillips Screwdriver #2
Disassembly Procedures
1.
Open the paper exit unit and the front cover Unit.
2.
Remove the side cover (LU). (See the item 7.1.1)
3.
Remove the side cover (L) and side cover (R). (See the item
7.1.2 and 7.1.3.)
4.
Remove the operator panel assembly. (One BT4 8 screw and
one connector to be removed.)
5.
Remove the set screw BT4 8 (3 pcs.) of top cover. (Top side 2
and Right side 1)
6.
Slightly lift up the upper side of top cover.
7.
Pull the top cover toward you, and unhook the hook from the
frame.
Assembly Procedures
1.
Prepare a new top cover.
2.
Assemble the top cover according to the reverse order of disassembling.
Top Cover
Connector
Replacement Procedures for Maintenance Parts
Operator Panel
123
Advertisement
Chapters
Table of Contents
