Warning Lights - Skoda Octavia Tour Owner's Manual

– Use switch to set the required speed limit, e.g. 50 km/h.
A
– Confirm the speed limit that was set with button
setting is saved automatically (the value stops flashing).
In this way you can set the limit in 5 km/h steps.
Configuring the speed limit while the vehicle is moving
– With switch , choose the menu point Warning against excessive speeds.
A
– Drive e.°g at a speed of 50 km/h.
– Press the switch to accept the current speed as the speed limit (the value
B
flashes).
If you wish to change the speed limit that was set, it is changed in 5 km/h intervals
(e.g. the accepted speed of 47 km/h increases to 50 km/h or decreases to 45 km/h).
– Confirm the speed limit that was set by pressing button
seconds until the setting is saved automatically (the value stops flashing).

Warning lights

Overview
The warning lights indicate certain functions or faults.
Using the system Safety
Changing or erasing the speed limit
, or wait 5 seconds until the
–
B
–
–
If you exceed the configured speed, an acoustic signal will sound as a warning. A
Warning against excessive speeds appears together with the set limit on the
display.
The set speed limit remains stored even after switching off the ignition.
Pay attention primarily to the traffic situation! As the driver you are fully respon-
again, or wait 5
B
sible for road safety.
Driving Tips General Maintenance
Instruments and Indicator/Warning Lights
With switch , choose the menu point Warning against excessive speeds.
A
When you press the switch again, the speed limit is erased.
B
Pressing the switch a further time activates the change mode for the speed
B
limit.
WARNING
Fig. 20 Instrument cluster with warning lights
Breakdown assistance
21
Technical Data