Table of Contents
Advertisement
Instruments and warning lights
Instrument cluster
Introduction
Fig. 19 Instrument cluster
Engine revolutions counter
» page 30
1
▶
with warning lights
» page 33
Display
» page 42
2
Speedometer
3
with warning lights
» page 33
▶
Coolant temperature gauge
4
Bar with warning lights
» page 33
5
Operation button
6
Set the time
» page 43
▶
Reset counter for distance travelled (trip)
▶
▶
Displaying the distance and days until the next service interval
» page 49
Fuel gauge
» page 31
7
The brightness of the instrument illumination is set automatically depending
on the ambient lighting throughout. If the visibility is poor and the lights are
not on, the brightness of the instrument lighting reduces to alert the driver to
switch on the lights in due time.
30
Using the system
» page 30
» page 42
The brightness of the instrument lighting can be adjusted in Infotainment in
the menu
/ → → → Light.
Engine revolutions counter
The tachometer
» fig. 19
on page 30 shows the actual engine speed per mi-
1
nute.
The beginning of the tachometer red scale range indicates the maximum per-
mitted speed for an engine that has been driven-in and has reached operating
temperature.
You should shift into the next highest gear before the red scale of the revolu-
tion counter is reached, or select mode D/S on the automatic gearbox.
The gear recommendation is important to note in order to maintain the opti-
mum engine speed
» page
43.
CAUTION
The pointer of the engine revolutions counter must reach the red area for only
a short time - there is a risk of engine damage!
Coolant temperature gauge
Fig. 20 Coolant temperature gauge
The display only works if the ignition is switched on.
Cold area, The engine has not yet reached its operating temperature.
A
Avoid high speeds and high engine loads.
The operating range
B
High temperature range, the warning light illuminates in the instrument
C
cluster
» page
39.
Advertisement
Table of Contents
