Warning Lights - Skoda Octavia Tour Owner's Manual

20 Instruments and Indicator/Warning Lights
Current consumption
The current fuel consumption level is shown in the display in litres/100 km. This
information can help you to adapt your style of driving to the fuel consumption you
wish to achieve.
The display appears in litres/hour if the vehicle is stationary or driving at a low
speed.
The indicated value will be updated every 0.5 seconds while you are driving.
Average fuel consumption
The average fuel consumption since the memory was last erased is shown in the
display in litres/100 km  page 18. This information can help you to adapt your style
of driving to the fuel consumption you wish to achieve.
If you wish to determine the average fuel consumption over a certain period of time,
you must set the memory at the start of the new measurement to zero using the
button on the windshield wiper lever. A zero appears in the display for the first
B
100 m you drive after erasing the memory.
The indicated value will be updated every 5 seconds while you are driving.
Note
The amount of fuel consumed will not be indicated.
Range
The estimated range in kilometres is shown on the display. It indicates the distance
you can still drive with your vehicle based on the current level of fuel in the tank for
the same style of driving.
The readout is shown in steps of 10 km. After lighting up of the indicator light for
the fuel reserve the display is shown in steps of 5 km.
The fuel consumption for the last 50 km is taken as a basis for calculating the range.
If you drive in a more economical manner, the range will be increased accordingly.
If the memory is set to zero (after disconnecting the battery), the fuel consumption
of 10 ltr./100 km is calculated for the range; afterwards the value is adapted accord-
ingly to the style of driving.
Distance driven
The distance driven since the memory was last erased appears in the display
 page 18. If you wish to calculate the distance driven as of a particular time, you
must erase the memory at this moment in time by pressing the button
 page 19, fig.
windshield wiper lever
The maximum distance indicated in both switch positions is 1,999 km. The indicator
is set back to null if this period is exceeded.
Average speed
The average speed since the memory was last erased is shown in the display in
km/hour  page 18. If you wish to determine the average speed over a certain
period of time, you must set the memory at the start of the new measurement to
zero using the button on the windshield wiper lever
B
Dashes appear in the display for the first 100 m you drive after erasing the memory.
The indicated value will be updated every 5 seconds while you are driving.
Current speed*
The current speed is displayed on the display. It is identical to the display on the
tachometer (speedometer)  page 15, fig.
2
Note
If the display of the second speed is activated in mph, the current speed* is not indi-
cated in km/h on the display.
Warning against excessive speeds*
This function enables you to set a speed limit and will notify you if you exceed this
speed limit.
Configuring the speed limit while the vehicle is stationary
– With switch  page 19, fig. 19, choose the menu point Warning against
A
excessive speeds.
– Press the switch to activate configuration of the speed limit (the value
B
flashes).
B
19.
 page 19, fig.
19.
15.
on the