See Performing Subsequent ActiveSync Operations on page 4-8 to synchronize again.
Note: You must perform your first ActiveSync operation with a local, direct
connection.
To retain partnerships after a cold boot, capture partnership registry
information in a .reg file and save it in the Flash File System. See the
Help file for details.
For more information about using ActiveSync, start ActiveSync on your desktop computer,
then see ActiveSync Help.
Performing ActiveSync using the Synchronization Cable
To perform an ActiveSync operation for the first time using the synchronization cable:
1. After installing the ActiveSync software, restart your desktop computer.
2. Insert the cable into the bottom of the terminal.
Figure 4-2. Inserting the Cable in the Terminal
Synchronization
Cable
Communications
4-5