Recording A Message; Entering Data Via The Bar Code Scanner (Scan Wedge) - Symbol PDT 8100 Series Product Reference Manual

Selecting a Drawing
To select a drawing to edit or format, tap and hold the stylus on the drawing until the
selection handle appears.
To select multiple drawings, deselect the Pen button, then drag to select the drawings you
want.
To cut, copy, and paste drawings, tap and hold the selected drawing, then tap an editing
command on the pop-up menu, or tap the command on the Edit menu. To resize a drawing,
deselect the Pen button and drag a selection handle.

Recording a Message

You may record a message to capture thoughts, reminders, and phone numbers. In
Calendar, Tasks, and Contacts, you can include a recording in the Notes tab. In the Notes
program, you can either create a stand-alone recording or include a recording in a written
note. To include the recording in a note, open the note first.
To create a recording:
1. Hold the terminal's microphone near your mouth or other source of sound.
2. Tap the Record button. A beep sounds, instructing you to begin recording.
3. While holding down the Record button, make your recording.
4. When you are finished, tap the Stop button. Two beeps sound. The new recording
appears in the note list or as an embedded icon.

Entering Data via the Bar Code Scanner (Scan Wedge)

Using the Scan Wedge program, the integrated bar code scanner on your terminal can
scan data into data fields in the same way data is entered via the keyboard. See
Scan Demo on page B-5 for more information.
Operating the PDT 8100
HTML
2-25