Attaching The Handstrap - Symbol PDT 8100 Series Product Reference Manual

PDT 8100 Series Product Reference Guide for Pocket PC 2002

Attaching the Handstrap

The PDT 8100 has an optional handstrap which increases comfort when holding the
terminal for extended periods of time. To attach the handstrap to the back of the terminal:

Attaching the Handstrap

1-18
1. Install the plastic
clip on the back of
the terminal using
the screw. (1-D
terminals only.)
2. Slide the end of the
strap into the
notches on the
bottom of the
battery door.
Figure 1-16. Attaching the Handstrap
3. On 1-D
terminals, slip
the top of the
strap through
the plastic clip
on the back of
the terminal.
On 2-D
terminals, slip
the top of the
strap through
the metal bar.
Adjust as
necessary.