PDT 8100 Series Product Reference Guide for Pocket PC 2002
Installing Batteries
Before using your PDT 8100, install the lithium-ion battery. The battery fits behind the
battery door on the back of the PDT 8100.
To install the battery in your PDT 8100:
1. Slide the latches on the battery cover up and lift the battery cover away from the
PDT 8100.
Latches
2. Insert the lithium-ion battery in the battery compartment with the battery tether
positioned properly (as shown below), making sure the battery snaps into place.
3. Replace the battery cover and press down firmly along the top edge of the cover
while sliding the latches down into the locked position.
1-8
Figure 1-4. Removing the Battery Cover
Figure 1-5. Inserting the Battery
Tether