Connecting Via Gsm - Symbol PDT 8100 Series Product Reference Manual

Connecting via GSM

To connect using the GSM WAN connection you created:
1. Select Settings from the Start menu.
2. Tap the Connections icon on the Connections tab.
3. Tap the Dialing Locations tab, then tap Dialing Patterns.
4. On the Dialing Patterns screen, edit the patterns as shown above, deleting the "9,"
from each location.
5. Tap OK until you return to the Connections screen, and select the Connections tab.
Tap Connect.
6. Enter a valid username and password on the screen that appears. The terminal
attempts connection.
Figure 10-26. Dialing Screens
Wireless Wide Area Network Configuration
10-33