PPT 2800 Series Product Reference Guide
Note: You must perform your first ActiveSync operation with a local, direct
connection, rather than using a modem.
Performing ActiveSync using the Synchronization Cable
To perform an ActiveSync operation for the first time using the synchronization cable:
1. After installing the ActiveSync software, restart your desktop computer.
2. Insert the cable into the bottom of the terminal.
3. Connect the other end of the cable to the serial communications port on your
desktop computer.
Figure 4-2. Connecting the Synchronization Cable to the Computer
Note: The synchronization cable requires a dedicated port. It cannot share
a port with an internal modem or other device. If you are unsure
4-4
Figure 4-1. Inserting the Cable in the Terminal
Serial Port
Synchronization
Cable