Ricoh 7025 Operating Instructions Manual page 375

❖ Maintenance
Menu
Menu Protect
❖ System
Menu
Print Error Report
Auto Continue
Memory Overflow
Duplex
Copies
Edge Smoothing
Toner Saving
Sub Paper Size
Page Size
Letterhead Setting
Description
This function lets you protect menu set-
tings from accidental change. It makes it
impossible to change menu settings
with normal procedures unless you per-
form the required key operations.
In a network environment, only admin-
istrators can make changes to menu set-
tings.
Description
You can print an error report when a
printer or memory error occurs.
You can select this to enable Auto Con-
tinue. When it is On, printing continues
after a system error occurs.
Select this to have a memory overflow
error report printed.
You can select to have print on both
sides of each page.
You can specify the number of print sets.
This setting is disabled if the number of
pages to print has been specified with
the printer driver or another command.
Set this to enable Edge Smoothing.
• On (Default)
• Off
If Toner Saving is set to On, Edge Smooth-
ing is ignored even if it is set to On.
Set this to enable Toner Saving.
• On (Default)
• Off
You can enable the Auto Substitute Pa-
per Size (A4, LT) feature.
You can select the default paper size.
You can rotate original images when
printing.
When printing, original images are al-
ways rotated by 180 degrees. Therefore,
output might not be as expected when
printing onto letterhead or preprinted
paper requiring orientation. Using this
function, you can specify image rotation.
Printer Enhance Option
Not Installed Installed
Printer Enhance Option
Not Installed Installed
-
-
-
-
-
-
-
7