Ricoh 7025 Operating Instructions Manual page 83

Note
❒ Load paper into the paper tray with the print side facing up.
❒ Load paper into the bypass tray with the print side facing down.
❒ When using the bypass tray, it is recommended that you set the paper orien-
tation to L.
❒ You must manually specify the size of custom size paper when loading it on
the bypass tray.
❒ If multiple-sheet jams occur, load the paper sheet by sheet.
❒ Do not use paper designed for inkjet printers, as these may stick to the fusing
unit and cause a misfeed.
❒ Load adhesive label sheets one at a time.
❒ To prevent misfeeds, when loading OHP transparencies, check both sides of
the sheets, and place them correctly.
❒ When loading OHP transparencies, select [OHP (Transparency)] as the paper
type for the bypass tray. For details, see "Copying from the Bypass Tray",
Copy Reference.
❒ When loading thick paper (106-162 g/m
make sure the top of the stack is not higher than the upper limit of the bypass
tray. Paper capacity varies depending on the thickness and condition of the
paper.
❒ When loading thick paper (106-162 g/m
the paper type for the bypass tray or Tray 2. For details, see "Copying from
the Bypass Tray", Copy Reference, and "Tray Paper Settings", General Set-
tings Guide.
❒ When loading adhesive labels, select [Thick Paper] as the paper type for the by-
pass tray. For details, see "Copying from the Bypass Tray", Copy Reference.
❒ When loading letterhead paper, placing orientation differs according to the
function you are using. See "Orientation-Fixed Paper or Two-Sided Paper",
Troubleshooting.
❒ If you load paper of the same size in the same orientation in two or more
trays, the machine automatically shifts to another tray when the first tray in
use runs out of paper. This function is called "Auto Tray Switching". (How-
ever, if one tray has recycled or special paper, the settings of the other trays
must be the same for Auto Tray Switching to work.) This saves interrupting
a copy run to replenish paper when making a large number of copies. See
"Copier Features", General Settings Guide, and "Tray Paper Settings", Gen-
eral Settings Guide.
Reference
"Copying from the Bypass Tray", Copy Reference
"Orientation-Fixed Paper or Two-Sided Paper", Troubleshooting
"Copier Features", General Settings Guide
"Tray Paper Settings", General Settings Guide
2
(28.2-43 lb.)), or adhesive labels,
2
(28.2-43 lb.)), select [Thick Paper] as
Copy Paper
3
69