Ricoh 7025 Operating Instructions Manual page 305

E
Select the original size using the scroll keys, and then press the {OK} key.
The "
Programmed
When the regular size originals settings are registered,
on the top of the copy display.
Note
❒ This function is not available in Auto Paper Select mode.
❒ To cancel the size you have set, press the {Clear Modes} key.
Custom sizes
When placing custom size originals on the exposure glass or in the ARDF, spec-
ify the size of the originals using the number keys.
Important
❒ Originals that have a vertical length of 105–297 mm (4.2"-11.6") and a horizon-
tal length of 128-1,260 mm (5.1"-49.6") can be specified.
A
Select [Byp.] using {U} or {T}.
B
Press the {q} key.
C
Select [Original Size] using {U} or {T}, and then press the {OK} key.
" message appears.
Placing Originals
1
appears
19