The Scanner Function; When Scanning Is Not Done As Expected - Ricoh 7025 Operating Instructions Manual

Troubleshooting When Using the DDST Unit

The Scanner Function

When Scanning Is Not Done As Expected

This section describes causes and remedies when scan results are not as expected.
Problem
The scanned image is dirty.
The image is distorted or out
of position.
The image is distorted or out
of position.
The scanned image is upside
down.
6
No image results from scanning. The original was placed with
The scanned image contains
white spaces.
82
Cause
The exposure glass, scanning
glass, exposure glass cover, or
ARDF is dirty.
The original was moved dur-
ing scanning.
The original was not pressed
flat against the exposure glass.
The original was placed up-
side down.
the front and back reversed.
If you scan originals using
functions other than the net-
work TWAIN scanner func-
tion, certain paper size and
resolution settings may pro-
duce scanned images that are
larger than the specified size
because of margins being add-
ed to the sides.
Solution
Clean these parts. See p.113
"Maintaining Your Machine".
Do not move the original dur-
ing scanning.
Make sure that the original is
pressed flat against the expo-
sure glass.
Place the original in the cor-
rect orientation. See "Placing
Originals", Printer/Scanner
Reference.
When the original is placed
directly on the exposure glass,
the side to be scanned must
face down. When the original
is fed via the ARDF, the side to
be scanned must face up. See
"Placing Originals", Print-
er/Scanner Reference.
Scanning at a higher resolu-
tion may reduce the margins.