Placing Originals On The Exposure Glass - Ricoh 7025 Operating Instructions Manual

Placing Originals on the Exposure Glass

Place originals on the exposure glass.
Important
❒ Do not lift the exposure glass cover or ARDF forcefully. Otherwise, it will be
damaged, or the cover of the ARDF might open.
A
Lift the exposure glass cover or ARDF.
Be sure to lift the exposure glass cover or ARDF by more than 30 degrees. Oth-
erwise, the size of the original might not be detected correctly.
B
Place the original face down on the exposure glass. The original should be
aligned with the rear left corner.
Start with the first page to be copied.
1 Positioning mark
2 Left scale
C
Lower the exposure glass cover or ARDF.
AAI025S
Placing Originals
1
13